In most ancient equipment, there are a large number of linear guide sliders, which makes use of the principle that the slider moves back and forth vividly in the linear guide. It is true that the overall moving track is fixed, and there will be lubricating oil, but due to different utilization environments, the slider itself will also have a certain life problem. Therefore, if the linear guide slider is damaged, is it repaired or directly replaced?

1、滑塊重要會呈現哪些問題  因為設備、環(huán)境等存在著較大的差別性，也不能說滑塊在利用進程中一定會呈現雷同或類似的故障，但大體上可能把這些故障或問題進行分成兩個局部，一是滑塊電機元件局部，二是導軌局部。在滑塊電機元件中，存在著馬達、彈簧、齒輪等多種小整機，很輕易呈現問題；在導軌局部上比方可能會因為生銹、變形等造成故障。

1. What are the important problems of the slider? Because there are great differences in equipment and environment, it can not be said that the slider will present similar or similar faults in the process of utilization, but generally, these faults or problems may be divided into two parts, one is the slider motor component part, and the other is the guide rail part. In the slider motor components, there are many small machines such as motor, spring and gear, which are easy to present problems; In some parts of the guide rail, for example, it may cause faults due to rust, deformation, etc.

2、是抉擇維修還是換新  個別來說，因為大多數滑塊體積不大，各種整機都是集成式的裝置在里面，所以假如是其中的某一個或多少個整機呈現問題的話，到維修點可能維修，但假如是要害性的整機，可能維修的用度跟換新的差未幾了。在大多數情況下，假如導軌不問題，可能直接調換新的滑塊，簡單便利，用度也不會太高。

2. Whether to repair or replace. Individually, because most sliders are small and all kinds of complete machines are integrated devices, if one or more of them have problems, it may be repaired at the maintenance point, but if it is a critical complete machine, the cost of maintenance may be almost the same as that of replacement. In most cases, if the guide rail is not a problem, it may be directly replaced with a new slider, which is simple and convenient, and the cost will not be too high.

3、假如換新，滑塊高嗎  用于不同設備的滑塊，在上也有著較大的差別，比方用于注塑機上的滑塊基本上10－20元就可能搞定，而對雕刻機上的滑塊的就十分高了。

3. If the slider is replaced, is the price high? There are great differences in the price of the slider used in different equipment. For example, the slider used in the injection molding machine is basically 10-20 yuan, and the price of the slider on the engraving machine is very high.