Many people know that the coupling is the intermediate connecting part of each motion mechanism, which has a direct impact on the normal operation of each motion mechanism. The following guide rail lead screw manufacturer will talk about the inspection and maintenance of the coupling:

一、聯軸器的檢查

1、 Inspection of coupling

1.檢查聯軸器本體上有沒有裂痕。

1. Check the coupling body for cracks.

2.檢查聯軸器的聯接是否堅固牢靠。

2. Check whether the coupling is firm and firm.

3.檢查聯軸器的鍵槽是否松動、滾鍵。

3. Check whether the keyway of the coupling is loose and rolled.

4.檢查聯軸器轉動時是否有徑向圓跳動和端面跳動。

4. Check whether there is radial circular runout and end face runout when the coupling rotates.

5.時常檢查聯軸器的潤滑狀態是否良好。

5. Always check whether the coupling is in good lubrication condition.
導軌絲杠

6.齒式聯軸器時常檢查齒輪完整狀態，磨損狀況及內外齒輪嚙合情況。

6. Always check the gear integrity, wear and engagement of internal and external gears for gear coupling.

二、聯軸器的保養與維護

2、 Maintenance of coupling

1.定期為設備局部拆卸和檢查，對規定部分進行清理清洗。

1. Periodically disassemble and inspect the parts of the equipment, and clean the specified parts.

2.觀察密封狀態，調整設備各部位的間隙，定期檢查緊固各設備的各個部位。

2. Observe the sealing status, adjust the clearance of all parts of the equipment, and regularly check and fasten all parts of the equipment.

3.定期加油，做防銹處理。

3. Add oil regularly and conduct anti-rust treatment.

在工作運轉中，應經常觀察聯軸器是否發生異常的徑向擺動和軸承發熱等現象，發現這些現象必須及時維修。更多相關事項就來我們網站http://www.emruisen.com咨詢了解吧！

During the operation, it is necessary to frequently observe whether the coupling has abnormal radial oscillation and bearing heating, and if these phenomena are found, they must be repaired in time. Come to our website for more relevant matters http://www.emruisen.com Ask about it!

上一篇：直線導軌和直線滑軌是一樣的嗎？
下一篇：關于導軌的設計要求與設計內容

相關：