保養誤區

　　Maintenance Misconceptions

　　誤區一:潤滑越多越好

　　Misconception 1: The more lubrication, the better

　　有人覺得潤滑脂加得越多越，實則過量會導致散熱差、積塵加速，反而增加摩擦。正確做法:每次少量涂抹，確保鋼珠與螺旋槽均勻覆蓋即可，每月檢查一次。

　　Some people think that adding more grease is safer, but in fact, excessive amount can lead to poor heat dissipation, accelerated dust accumulation, and increased friction. Correct practice: Apply a small amount each time to ensure that the steel ball and spiral groove are evenly covered. Check once a month.

　　誤區二:忽視環境清潔

　　Misconception 2: Neglecting environmental cleanliness

　　粉塵、冷卻液是滾珠絲杠的“隱形殺手”，很多人只擦表面卻忽略螺旋槽內的殘留。建議:每周用高壓氣槍清理槽內雜質，潮濕環境加防護套，避免銹蝕。

　　Dust and coolant are the "invisible killers" of ball screws, and many people only wipe the surface but ignore the residue inside the spiral groove. Suggestion: Use a high-pressure air gun to clean impurities in the tank every week, and add a protective cover in a humid environment to avoid corrosion.

　　誤區三:故障就拆修

　　Misconception 3: Disassemble and repair faults

　　輕微異響或卡頓就急于拆卸，可能導致安裝精度丟失。正確步驟:先排查是否缺潤滑或有異物，非結構性問題盡量不拆，必要時找人員校準。

　　Hasty disassembly due to slight abnormal noise or jamming may result in loss of installation accuracy. Correct steps: First, check if there is a lack of lubrication or foreign objects. Non structural problems should be avoided as much as possible, and if necessary, seek professional calibration.

　　本文由 導軌絲杠 友情奉獻.更多有關的知識請點擊  http://www.emruisen.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the guide screw For more related knowledge, please click http://www.emruisen.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.